ESC Kontronic JIVE - mise à jour importante

[DESMO4 1]

Hello,

je me permet de diffuser l'info, car elle est assez importante pour tout les possesseurs de KontroniK JIVE

J'ai eu cette info en posant directement la question à Kontronik sur le pourquoi/du comment du software V9 alors que mes ESC JIVE 120 très récents étaient en V7

----- Original Message -----

From: info@kontronik.com

To:

Sent: Tuesday, November 16, 2010 9:27 AM

Subject: KONTRONIK - SERVICE

Dear Mr. X,

Thank you for your E-Mail. KONTRONIK announces a new software version 9 for all JIVE Controllers.

This version corrects the following:

In rare cases, the firmware would accidentally change the stored settings unexpectedly. .e. RPM while starting up) This would make the JIVE seem like it had forgotten its programming.

In the case of the BEC shutting down due to Inductive voltage back feeding from the servos, the BEC would take longer to bring back to full power. V9 restores full power after .5 seconds, and raises the shutdown voltage threshold out of the inductive voltage range.

All JIVE ESC’s are required to be sent to KONTRONIK for update, along with a completed KONTRONIK Repair form.

Online update via Progdisk is NOT possible.

Lead time for updating an ESC is approximately 1-2 days.

Kind regards from Germany

Your KONTRONIK-Team

-------------------------------------------------------

KONTRONIK GmbH

Etzwiesenstr. 35/1

D-72108 Rottenburg

Telefon +49 7457 94350 · Fax +49 7457 943590

Vertretungsberechtigter Geschäftsführer:

Harald Konrath

Handelsregister: Amtsgericht Stuttgart HRB390410

Steuernummer: 86114/97803

Umsatzsteuer-Identifikationsnummer: DE164110931

WEEE-Reg.-Nr. DE95985619

-------------------------------------------------------

[Invité]

Merci Desmo, en effet ça mérite de faire l'Upgrade !

Bonne soirée

JL